空氣增壓?jiǎn)卧膽迷硎抢么竺娣e活塞的低氣壓來促進小面積活塞的高液壓輸出。它對增加每個設備的壓力起到了很好的作用。空氣增壓?jiǎn)卧糜谛枰黾釉瓪鈮合到y壓力的工作環境。它可以將工作系統的空氣壓力提高2-5倍。只有工作系統中的壓縮空氣才需要用作氣源。空氣增壓系統的工作介質可以是空氣、氮氣、氧氣、氫氣、甲烷、沼氣、天然氣和其他氣體。氣體輸出壓力可達90Mpa（900bar），廣泛應用于電力、石化、冶金等行業。在操作過程中，增壓泵快速往復運動。當輸出壓力接近設定壓力值時，泵的往復速度減慢，直到停止。此時，泵輸出壓力恒定，能耗小，所有部件停止移動。

The application principle of the air boosting unit is to use the low air pressure of the large area piston to promote the high hydraulic output of the small area piston. It has played a good role in increasing the pressure on each device. The air booster unit is used in working environments that require an increase in the pressure of the original air pressure system. It can increase the air pressure of the working system by 2-5 times. Only compressed air in the working system needs to be used as a gas source. The working medium of an air boosting system can be air, nitrogen, oxygen, hydrogen, methane, biogas, natural gas, and other gases. The gas output pressure can reach 90Mpa (900bar) and is widely used in industries such as power, petrochemicals, and metallurgy. During operation, the booster pump moves rapidly back and forth. When the output pressure approaches the set pressure value, the reciprocating speed of the pump slows down until it stops. At this point, the pump output pressure remains constant, energy consumption is low, and all components stop moving.

空氣增壓?jiǎn)卧O備特點

Characteristics of Air Boosting Unit Equipment

1.多氣源驅動：壓縮空氣、氮氣等可用作泵的驅動氣源。

1. Multi gas source drive: Compressed air, nitrogen, etc. can be used as the driving gas source for pumps.

2.自動保壓：無論是什么原因導致保壓回路的壓力下降，增壓泵都會(huì )自動啟動，以補充泄漏壓力并保持回路壓力恒定。

2. Automatic pressure maintaining: Regardless of the reason for the pressure drop in the pressure maintaining circuit, the booster pump will automatically start to supplement the leakage pressure and maintain a constant circuit pressure.

3.無級可調壓力。

3. Stepless adjustable pressure.

4.泵能連續工作。當達到所需壓力時，泵不會(huì )移動，此時不會(huì )消耗能量。

4. The pump can operate continuously. When the required pressure is reached, the pump will not move and will not consume energy.

5.結構緊湊，安裝空間小。

5. Compact structure and small installation space.

6、可長時間保持壓力，不消耗能量。

6. Can maintain pressure for a long time without consuming energy.

7、適用于多塵、潮濕等惡劣環境。

7. Suitable for harsh environments such as dust and humidity.

8.可以使用各種介質：空氣、氮氣、氧氣、氫氣、氬氣、甲烷、天然氣等。

8. Various media can be used: air, nitrogen, oxygen, hydrogen, argon, methane, natural gas, etc.

9.由壓縮氣體驅動，特別適用于防爆應用。

9. Driven by compressed gas, particularly suitable for explosion-proof applications.

10.保壓過程中介質不會(huì )過熱，從而延長介質的使用壽命。

During the pressure holding process, the medium will not overheat, thereby extending the service life of the medium.

空氣增壓?jiǎn)卧獕嚎s空氣、液化氮、管道氮氣和水蒸氣。大輸出流量：僅需0.3-0.69MPa壓縮空氣驅動即可獲得大輸出流量。自動保壓：在操作過程中，往復操作迅速。當輸出壓力接近設定壓力值時，泵的往復運動速度減慢，直到停止。保持這個壓力。此時，能量消耗非常小，沒有熱量產生，也沒有零件移動。當壓力平衡被打破時，氣動增壓泵自動開始工作下一個平衡。好的材料：高壓部分由不銹鋼制成。高壓柱塞由不銹鋼制成，并用雙密封件密封。維護簡單：氣動增壓泵零件和密封件少，維護簡單，成本低。同一系列泵的所有“O”形環和修理包的易損件可以相互更換。

The air booster unit compresses air, liquefied nitrogen, pipeline nitrogen, and water vapor. Large output flow rate: Only 0.3-0.69MPa compressed air drive is needed to obtain a large output flow rate. Automatic pressure holding: During operation, the reciprocating operation is rapid. When the output pressure approaches the set pressure value, the reciprocating speed of the pump slows down until it stops. Maintain this pressure. At this point, the energy consumption is very small, no heat is generated, and no parts are moving. When the pressure balance is disrupted, the pneumatic booster pump automatically starts working to the next balance. Good material: The high-pressure section is made of stainless steel. The high-pressure plunger is made of stainless steel and sealed with double seals. Easy maintenance: The pneumatic booster pump has fewer parts and seals, making it easy to maintain and cost-effective. All O-rings and vulnerable parts of the repair kit for the same series of pumps can be replaced with each other.